#BAROTRAUMA NINTENDO SWITCH HOW TO#

(Make sure the value of the Memory component is set to 0) If you want the door locking to be automatic, replace the switch with a water sensor in the airlock, the water sensor will send out a constant value of 1 when the airlock is flooded, and will prevent the inner door from being opened and flooding the ship.

Switch(Signal_Out) > Relay(Set_State) This controls whether the door is locked or not.Īnd there you have it, when the switch is toggled on, the door will be locked.

Here is what the final setup will look like:Ĭomponents needed: 1 Relay, 1 MEM, 1 Switch, and the door you want lockable. Toggling the relay will toggle if the door is locked or not. Now, since you don't want the door to be locked all the time, here is where the Relay comes in. MEM components send out a constant value, and if you set that value to 0 in their menu, it will constantly send out a signal that will lock doors, preventing them from being opened by anything short of plasma cutters. Generally you want the actual door locking mechanism to be a memory component wired to a relay. Oh and English is not my first Language so i hope you can forgive for any Typos and/or strange Phrasing in this Post.

#BAROTRAUMA NINTENDO SWITCH HOW TO#

I tried to figure out this one by 'dismanteling' Some Subs, but they only had a design with to Coilguns connected to one Periscope and i did not really understand how that worked either so if someone could help me out with which Components i would need and how to connenct those that woulf be awesome. But if needed i can use the Switch and operate both the Cameras and the Coilgun from the Secondary Periscope while the 'Main' Periscope would be 'inactive' al long as the Switch is still active. What i want here is the Option to switch between the Two Periscopes via a Switch so, that normally the Upper 'Main Periscope' is used to Fire the Coilgun and the Lower Secondary Periscope is used to operate the Cameras. Sooo, since Wiring Stuff is still very complicated to me ( or the things i wanna build are ) i have another Question. I didn't even attempt to wire it because i don't know where to Start. I know how to wire the Reactors as the should only feed the Battery with Power in order to Charge them, but don't know how to wire the whole Power Grid so that the Back Up Power Array can be Toggled On and Off with a Switch or Terminal if needed, and how to wire everything to the Junction Boxes. The second Problem is the bigger issue, its the Power Grid of the Sub. I can't get that Airlock System to Work with the 'Locking' Switch for the Life of Me, so any Help is appreciated. The Wiring of the AND Component that connects both Doors.

Here is how the Doors Are Wired at the Moment: I know i probably need use a Component-Thing, but i can't figure out what Component or how to wire it with the current Set-Up in Order to Work. That is the Current Layout, and i can't figure out how to wire the Switch in left Corner so that the Non-Windowed Door is 'Locked' and can't be opened. The first and less complicated (i think) Problem is an Airlock System here are some Pictures: Just as said in the Title, i need some Help with wiring because i'm apparently to stupid to figure how how to wire some Stuff so that it works the Way i intended it to.

Barotrauma nintendo switch